/  BearingShaft sealHoused BearingRod endAnti-vibration mountAccessoryV & Wedge Belts /  O-Ring sealRotary shaft sealHydraulic sealV-Ring sealSealing washerX-Ring sealWiper sealCord sealEnd coverNILOS sealPiston sealOther sealO-Ring KitsPneumatic sealBack-up Ring / OR-126.37X5.33-FPM80 - 126.37x137.03x5.33 mm

O-Ring seal OR-126.37X5.33-FPM80 - 126.37x137.03x5.33 mm

Reference : OR-126.37X5.33-FPM80

Select a material :

126.37 137.03 5.33

Price : €13.95 Excl. VAT
unit

11 items in stock

 Fast delivery

Shipping in 07h 24min 42s  

Shipping costs from €8.25

Technical Info

Category: O-Ring seal

Quality: Premium

Brand: Generic

Inner diam.: 126.37 mm

Outer diam.: 137.03 mm

Width: 5.33 mm

Weight: 0.02 kg

Material: FPM

N°EAN13:  3616060252746

Le conseil de l'expert

How to read the reference of an O-ring?

Example:
OR-40X3-NBR90
Where
OR = product type (O-ring or O-ring seal)
40X3 = inside diameter X thickness
NBR = matter
90 = shore hardness

Shore hardness is a material hardness scale, usually between 70 and 90 for O-rings. The higher the number, the harder the material.

What does the number mean at the end of the reference?

This is the indication of shore hardness. Shore hardness is a material hardness scale, usually between 70 and 90 for O-rings. The higher the number, the harder the material.

Difference between NBR, FPM, EPDM, MVQ?

These are the different types of rubber. Each material will be more or less suitable for a use. Refer to the following information: FOR OILS NBR = Nitrile = Butadiene rubber - Acrylonitrile
        from -30°C to +120°C
FPM = Viton = Fluorinated Rubber
        from -20°C to +200°C
MVQ = Silicone rubber
        from -50°C to +210°C
FOR HYDROCARBONS NBR = Nitrile = Butadiene rubber - Acrylonitrile
        from -30°C to +120°C
FPM = Viton = Fluorinated Rubber
        from -20°C to +200°C
FOR BRAKE FLUID EPDM = Ethylene Rubber - Propylene - Diene
        from -40°C to +150°C
FOR WATER EPDM = Ethylene Rubber - Propylene - Diene
        from -40°C to +150°C
MVQ = Silicone rubber
        from -50°C to +210°C CAUTION: never water above 80 ° C
FOR MORE DETAILS ON THE MATERIALS, THEIR STRENGTHS AND LIMITS OF USE, REFER TO THE COMPLETE DESCRIPTION ON THE SEALED SEARCH PAGE

How to choose the size of my O-ring?

An O-ring should not, in general, be too stretched. It is therefore preferable to take a dimension as close as possible to the groove diameter, if applicable.

Description

This seal material FPM, can be used at temperatures ranging from -20 C to +200 C
The seals FPM material are are resistant to heat, aggressive mineral oils, natural weathering, petroleum products (hydrocarbons), aliphatic and aromatic solvents, dilute acids and bases, strong acids, and have good gas impermeability, and poor resistance to ketone solvents, brake fluid (glycol ether) and fire-resistant hydraulic fluids.
The seals FPM material are resistant to flame, good compression set. Moderate strength, tensile strength, tear and abrasion resistance, and poor resistance to bending.