Self Aligning Roller Bearing
Part number : 23152-BE-XL-K-FAG
Description
The Self Aligning Roller Bearing, known as 23152-BE-XL-K-FAG FAG, has an inner diameter of 260 mm, an outer diameter of 440 mm and a thickness of 144 mm.
What is a self aligning bearing?
You can find all the information you need about our products in our expert's advice, by clicking here Here
8 to 10 days
Quantity | Price |
---|---|
0 - 4 | €3,491.58 excl. VAT |
5 - 9 | €3,337.84 excl. VAT |
10 - 24 | €3,184.10 excl. VAT |
25 - 49 | €3,030.36 excl. VAT |
Need help or advice?
+33.359.36.04.90
Description
The Self Aligning Roller Bearing, known as 23152-BE-XL-K-FAG FAG, has an inner diameter of 260 mm, an outer diameter of 440 mm and a thickness of 144 mm.
What is a self aligning bearing?
You can find all the information you need about our products in our expert's advice, by clicking here Here
Need help or advice?
+33.359.36.04.90
Brand | FAG |
---|---|
N° EAN13 | 4012802328738 |
Inside diameter | 260 mm |
Outside diameter | 440 mm |
Thickness | 144 mm |
Limiting speed | 1 500 rpm |
Weight | 84 840 g |
Dynamic load | 2 600 kN |
Static load | 3 900 kN |
Packaging | 1 |
Standard | No standard |
The Self Aligning Roller Bearing, known as 23152-BE-XL-K-FAG FAG, has an inner diameter of 260 mm, an outer diameter of 440 mm and a thickness of 144 mm.
What is a self aligning bearing?
A spherical bearing, or swinging bearing is a bearing that is able to accept that the spindle is slightly out of alignment. These bearings are regularly located in grinders or agricultural machines, regularly placed in cast iron SN bearings, with a shim washer and seals specific to these bearings. Attention, there are 2 important variants: • The cylindrical bore bearing, which will be mounted directly on the shaft, in force
• The tapered bore bearing, mounted with a sleeve, on an axis smaller than the bore of basis of turnover. The tapered bore is indicated by the letter K in the reference.What does the letter K mean in the reference?
The letter K means that the bearing has a tapered bore. It should therefore almost always be mounted with a conical sleeve. Attention, this bearing is generally mounted on an axis of 5mm less than the dimension indicated for the bearing.