/  BearingShaft sealHoused BearingRod endAnti-vibration mountAccessoryV & Wedge Belts /  O-Ring sealRotary shaft sealHydraulic sealV-Ring sealSealing washerX-Ring sealWiper sealCord sealEnd coverNILOS sealPiston sealOther sealO-Ring KitsPneumatic sealBack-up Ring / OR-128X3-EPDM70 - 128x134x3 mm

O-Ring seal OR-128X3-EPDM70 - 128x134x3 mm

Reference : OR-128X3-EPDM70

Select a material :

128 134 3

Price : €1.91 Excl. VAT
unit

72 items in stock

Minimum order 3

 Fast delivery

Shipping in 06h 42min 21s  

Shipping costs from €8.25

Technical Info

Category: O-Ring seal

Quality: Premium

Brand: Generic

Inner diam.: 128 mm

Outer diam.: 134 mm

Width: 3 mm

Weight: 0.004 kg

Material: EPDM

N°EAN13:  3616060253743

Le conseil de l'expert

How to read the reference of an O-ring?

Example:
OR-40X3-NBR90
Where
OR = product type (O-ring or O-ring seal)
40X3 = inside diameter X thickness
NBR = matter
90 = shore hardness

Shore hardness is a material hardness scale, usually between 70 and 90 for O-rings. The higher the number, the harder the material.

What does the number mean at the end of the reference?

This is the indication of shore hardness. Shore hardness is a material hardness scale, usually between 70 and 90 for O-rings. The higher the number, the harder the material.

Difference between NBR, FPM, EPDM, MVQ?

These are the different types of rubber. Each material will be more or less suitable for a use. Refer to the following information: FOR OILS NBR = Nitrile = Butadiene rubber - Acrylonitrile
        from -30°C to +120°C
FPM = Viton = Fluorinated Rubber
        from -20°C to +200°C
MVQ = Silicone rubber
        from -50°C to +210°C
FOR HYDROCARBONS NBR = Nitrile = Butadiene rubber - Acrylonitrile
        from -30°C to +120°C
FPM = Viton = Fluorinated Rubber
        from -20°C to +200°C
FOR BRAKE FLUID EPDM = Ethylene Rubber - Propylene - Diene
        from -40°C to +150°C
FOR WATER EPDM = Ethylene Rubber - Propylene - Diene
        from -40°C to +150°C
MVQ = Silicone rubber
        from -50°C to +210°C CAUTION: never water above 80 ° C
FOR MORE DETAILS ON THE MATERIALS, THEIR STRENGTHS AND LIMITS OF USE, REFER TO THE COMPLETE DESCRIPTION ON THE SEALED SEARCH PAGE

How to choose the size of my O-ring?

An O-ring should not, in general, be too stretched. It is therefore preferable to take a dimension as close as possible to the groove diameter, if applicable.

Description

This seal material EPDM, can be used at temperatures ranging from - 50 C to + 150 C.
The seals EPDM material are resistant to water and water vapor, cold, heat, atmospheric conditions, the light, the brake fluid (glycol ether), and hydraulic fluids dilute acids and bases, and poor resistance to mineral oils and greases, petroleum products (hydrocarbons), and have poor gas barrier.
The seals EPDM material are resistant to tensile, bending, tearing, abrasion and poor resistance to flame.