GEN

Self Aligning Roller Bearing

22207-CC-W33

Inside diameter 35
Outside diameter 72
Thickness 23

Part number : 22207-CC-W33

GEN

Description

The Self Aligning Roller Bearing, known as 22207-CC-W33 Generic, has an inner diameter of 35 mm, an outer diameter of 72 mm and a thickness of 23 mm.

See data sheet

What is a self aligning bearing?

You can find all the information you need about our products in our expert's advice, by clicking here Here

Your price: €26.31 excl. VAT

  20 parts in stock

logo_delivery Last departure in      
product_sheet product_sheet product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment
picto_need_help

Need help or advice?

+33.359.36.04.90

Description

The Self Aligning Roller Bearing, known as 22207-CC-W33 Generic, has an inner diameter of 35 mm, an outer diameter of 72 mm and a thickness of 23 mm.

See data sheet

What is a self aligning bearing?

You can find all the information you need about our products in our expert's advice, by clicking here Here

product_sheet product_sheet product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment
picto_need_help

Need help or advice?

+33.359.36.04.90

CUSTOMERS ALSO BOUGHT

TECHNICAL DATA

Brand GEN
Inside diameter 35 mm
Outside diameter 72 mm
Thickness 23 mm
Limiting speed 6 300 rpm
Weight 430 g
Dynamic load 67 300 kN
Static load 73 500 kN
Packaging 1

PRODUCT DESCRIPTION

The Self Aligning Roller Bearing, known as 22207-CC-W33 Generic, has an inner diameter of 35 mm, an outer diameter of 72 mm and a thickness of 23 mm.

EXPERT ADVICE

What is a self aligning bearing?

A spherical bearing, or swinging bearing is a bearing that is able to accept that the spindle is slightly out of alignment. These bearings are regularly located in grinders or agricultural machines, regularly placed in cast iron SN bearings, with a shim washer and seals specific to these bearings. Attention, there are 2 important variants: • The cylindrical bore bearing, which will be mounted directly on the shaft, in force
• The tapered bore bearing, mounted with a sleeve, on an axis smaller than the bore of basis of turnover.
The tapered bore is indicated by the letter K in the reference.

What does the letter K mean in the reference?

The letter K means that the bearing has a tapered bore. It should therefore almost always be mounted with a conical sleeve. Attention, this bearing is generally mounted on an axis of 5mm less than the dimension indicated for the bearing.

CUSTOMER REVIEWS